Umbrella Hole Replacement Tiles For Patio Table 12X12 (2024)

FAQs

What size is the umbrella hole in a patio table? ›

Most tables use a standard 1.75″ hole for patio umbrellas but it's always a good idea to check to make sure. 1.75″ is the standard size for Treasure Gardens Umbrellas.

Simply use a saw that is 1/16" larger than the diameter of your umbrella pole, but no larger than 2" diameter. Center the saw in the hole, drill the hole, then lightly sand the hole edges. Ta-da!

This is simply the square footage of the space divided by the area of each tile. For example, if the square footage of the space is 120 square feet and each tile is 12 inches by 12 inches, the calculation would be 120 square feet / (12 inches x 12 inches) = 120 square feet / 144 square inches = 0.83 tiles.

The first thing I did was remove the tiles and bring them into the garage and place on a table for work space. I primed the tiles first with one coat of Kilz brand primer and let it completely dry. Next, I painted the tiles with 2 coats of the Plaster chalk paint letting them dry between coats.

You will find that most outdoor patio tables have a hole that is designed for an umbrella, that is between 1.75” and 2” in diameter. The good news is that all of the umbrellas for sale at Sunniland Patio have a pole diameter of 1.5”, so should be able to fit into almost any table with ease.

Most umbrella manufacturers build individual umbrellas to their own specifications, meaning that all umbrellas are not created equal and or built to the same length, diameter and thickness. “Most Patio umbrellas will very in width up to several inches depending on each manufacturer”.

All you need to do is iron on a patch to the center of the tablecloth, then cut out a hole for the umbrella. Below are step-by-step instructions with photos to guide you through the process.

The answer is Yes! The hole in an outdoor dining table by itself does not provide sufficient support to keep your umbrella standing tall and secure. Tables can range in size, shape, material and design and are often light weight.

Tiles are commonly referred to by their "nominal" sizes which might not be the "true" measurement of the material. An example of this is when a 12" x 12" porcelain tile has a "true" measurement of 11-7/8" x 11-7/8".

What size gap for 12x12 tile? ›

Daltile recommends that large tiles have a 1/8” or 3/16” minimum grout joint for the most successful installation. The difference is not really noticeable visually, but can make a big difference to the quality of the installation.

I you mean12 inches by 12 inches each tile is one square foot. 10 of them will cover 10 square feet. 10 12x12 tiles will cover 120 square feet . This is calculated by multiplying the length and width of each tile ( 12x12 = 144 square inches ) and then converting to square feet ( 144 square inches = 1 square foot ) .

Using a caulking gun, apply construction adhesive over the top of the table and position the sheet of cut-to-size marine plywood, pressing it down evenly and flush with the edges. Work out the positioning of the tiles. (Our tiles fit without needing to be cut.)

If you're fixing outdoor porcelain tiles onto mortar, you'll need to use a slurry primer, which can help create an ultra strong bond between the tile adhesive and the surface.

The most common size umbrella pole is 1.5” in diameter, but can range anywhere from 1 1/8 to 3” depending on the type and size you order.

Garden umbrellas are manufactured in sizes like 36" 40" 42" 48" (radius of the umbrella after opening). The offered umbrella is designed and developed by the professionals using premium grade raw material.